README.md 32.5 KB
Newer Older
Jonathan Gazeley's avatar
Jonathan Gazeley committed
1
# freeradius
Jonathan's avatar
Jonathan committed
2

3
4
5
6
#### Table of Contents

1. [Overview](#overview)
2. [Module Description - What the module does and why it is useful](#module-description)
7
3. [Usage - Configuration options and additional functionality](#usage)
8
9
    * [Classes](#classes)
       * [`freeradius`](#freeradius)
Jonathan Gazeley's avatar
Jonathan Gazeley committed
10
       * [`freeradius::status_server`](#freeradiusstatus_server)
11
       * [`freeradius::control_socket`](#freeradiuscontrol_socket)
12
    * [Resources](#resources)
13
       * [`freeradius::attr`](#freeradiusattr)
14
       * [`freeradius::blank`](#freeradiusblank)
15
       * [`freeradius::cert`](#freeradiuscert)
16
17
18
       * [`freeradius::client`](#freeradiusclient)
       * [`freeradius::config`](#freeradiusconfig)
       * [`freeradius::dictionary`](#freeradiusdictionary)
19
20
       * [`freeradius::home_server`](#freeradiushomeserver)
       * [`freeradius::home_server_pool`](#freeradiushomeserverpool)
21
       * [`freeradius::instantiate`](#freeradiusinstantiate)
22
       * [`freeradius::ldap`](#freeradiusldap)
23
       * [`freeradius::krb5`](#freeradiuskrb5)
24
25
       * [`freeradius::module`](#freeradiusmodule)
       * [`freeradius::policy`](#freeradiuspolicy)
26
       * [`freeradius::realm`](#freeradiusrealm)
27
       * [`freeradius::site`](#freeradiussite)
Jonathan Gazeley's avatar
Jonathan Gazeley committed
28
       * [`freeradius::sql`](#freeradiussql)
29
       * [`freeradius::statusclient`](#freeradiusstatusclient)
30
       * [`freeradius::template`](#freeradiustemplate)
31
       * [`freeradius::virtual_module`](#freeradiusvirtual_module)
32
33
34
4. [Limitations - OS compatibility, etc.](#limitations)
5. [Development - Guide for contributing to the module](#development)
6. [Release Notes](#release-notes)
35
36
37

## Overview

38
This module installs and configures [FreeRADIUS](http://freeradius.org/) server
39
on Linux. It supports FreeRADIUS 3.x only. It was designed with CentOS in mind
Jonathan Gazeley's avatar
Jonathan Gazeley committed
40
41
42
43
but should work on other distributions. Please note that at this time, current
versions of Debian and Ubuntu still package FreeRADIUS 2.2.x which is end-of-life.
If you use Debian or Ubuntu, you will need to use version 1.x of this module,
which itself is no longer maintained.
44

Jonathan Gazeley's avatar
Jonathan Gazeley committed
45
46
47
48
49
50
| `jgazeley/freeradius` | FreeRADIUS  |
| --------------------- | ----------- |
| 2.x                   | 3.x         |
| 1.x                   | 2.x and 3.x |
| 0.x                   | 2.x         |

51
52
## Module Description

53
54
55
56
57
58
This module installs FreeRADIUS from a distro-provided package and installs a
number of customised config files to enable flexibility. It then provides some
helpers to allow you to easily configure virtual servers (sites), modules, clients
and other config items. Most of these items accept a flat config file which you
supply either as a static file or a template - similar to the `source` and `content`
parameters in Puppet's `file` resource.
59

60
61
62
This module is designed to make it more straightforward for RADIUS administrators to
deploy RADIUS servers using Puppet. This module does not serve as a wizard and does
not avoid having to have an understanding of FreeRADIUS.
63
64


65
## Usage
66

67
This module provides several classes and defined types which take parameters.
68

69
### Classes
70

71
#### `freeradius`
72

73
74
The `freeradius` class installs the base server. In the early releases, this class does not
have many parameters as most values are hard-coded. I am working on parameterising more
75
76
of the global settings to increase flexibility. Patches are welcome.

77
##### `control_socket`
78
Use of the control_socket parameter in the freeradius class is deprecated. Use the `freeradius::control_socket` class instead.
79
80
81
82
83
84
85
86

##### `max_requests`
The maximum number of requests which the server keeps track of. This should be 256 multiplied by the number of clients. Default: `4096`

##### `max_servers`
Limit on the total number of servers running. Default: `4096`

##### `mysql_support`
87
Install support for MySQL. Note this only installs the package. Use `freeradius::sql` to configure SQL support. Default: `false`
88
89
90
91

##### `perl_support`
Install support for Perl. Default: `false`

92
93
94
##### `preserve_mods`
Leave recommended stock modules enabled. Default: `true`

95
96
97
98
99
100
##### `utils_support`
Install FreeRADIUS utils. Default: `false`

##### `ldap_support`
Install support for LDAP. Default: `false`

101
102
103
##### `krb5_support`
Install support for Kerberos. Default: `false`

104
##### `wpa_supplicant`
105
106
Install wpa_supplicant utility. Default: `false`

107
##### `winbind_support`
108
Add the radius user to the winbind privileged group. You must install winbind separately. Default: `false`.
109

110
111
112
##### `log_destination`
Configure destination of log messages. Valid values are `files`, `syslog`, `stdout` and `stderr`. Default: `files`.

113
##### `syslog`
114
Add a syslog rule (using the `saz/rsyslog` module). Default: `false`.
115

116
117
118
##### `log_auth`
Log authentication requests (yes/no). Default: `no`.

Jonathan Gazeley's avatar
Jonathan Gazeley committed
119
120
```puppet
class { 'freeradius':
121
122
123
124
125
126
127
  max_requests    => 4096,
  max_servers     => 4096,
  mysql_support   => true,
  perl_support    => true,
  utils_support   => true,
  wpa_supplicant  => true,
  winbind_support => true,
128
  syslog          => true,
129
  log_auth        => 'yes',
Jonathan Gazeley's avatar
Jonathan Gazeley committed
130
131
132
}
```

133
134
#### `freeradius::status_server`

135
136
The `freeradius::status_server` class enabled the [status server](http://wiki.freeradius.org/config/Status).
To remove the status server, do not include this class and the server will be removed.
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154

##### `secret`
The shared secret for the status server. Required.

##### `port`
The port to listen for status requests on. Default: `18121`

##### `listen`
The address to listen on. Defaults to listen on all addresses but you could set this to `$::ipaddress` or `127.0.0.1`.  Default: `*`

```puppet
  # Enable status server
  class { 'freeradius::status_server':
    port   => '18120',
    secret => 't0pSecret!',
  }
```

155
156
157
158
159
160
161
162
#### `freeradius::control_socket`

The `freeradius::control_socket` class enables the control socket which can be used with [RADMIN](http://freeradius.org/radiusd/man/radmin.html).
To remove the control socket, do not include this class and the socket will be removed.

##### `mode`
Whether the control socket should be read-only or read-write. Choose from `ro`, `rw`. Default: `ro`.

Jonathan Gazeley's avatar
Jonathan Gazeley committed
163
164
165
166
167
168
169
```puppet
  # Enable control socket
  class { 'freeradius::control_socket':
    mode => 'ro',
  }
```

170
### Resources
171

172
#### `freeradius::attr`
173

174
Install arbitrary attribute filters from a flat file. These are installed in an appropriate module config directory.
175
The contents of the `attr_filter` module are automatically updated to reference the filters.
176
177
178
179

##### `key`

Specify a RADIUS attribute to be the key for this attribute filter. Enter only the string part of the name.
Jonathan Gazeley's avatar
Jonathan Gazeley committed
180

181
182
183
184
185
##### `prefix`

Specify the prefix for the attribute filter name before the dot, e.g. `filter.post_proxy`. This is usually set
to `filter` on FR2 and `attr_filter` on FR3. Default: `filter`.

186
```puppet
Jonathan Gazeley's avatar
Jonathan Gazeley committed
187
freeradius::attr { 'eduroamlocal':
188
  key    => 'User-Name',
189
  prefix => 'attr_filter',
Jonathan Gazeley's avatar
Jonathan Gazeley committed
190
191
192
  source => 'puppet:///modules/site_freeradius/eduroamlocal',
}
```
193

194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
#### `freeradius::blank`

Selectively blank certain stock config files that aren't required. This is preferable to deleting them
because the package manager will replace certain files next time the package is upgraded, potentially
causing unexpected behaviour.

The resource title should be the relative path from the FreeRADIUS config directory to the file(s) you
want to blank. You can pass multiple files in an array.

```puppet
freeradius::blank { 'sites-enabled/default': }

freeradius::blank { [
  'sites-enabled/default',
  'eap.conf',
]: }
```

212
213
#### `freeradius::cert`

214
Install certificates as provided. These are installed in `/etc/raddb/certs`. Beware that any certificates *not* deployed by Puppet will be purged from this directory.
215
216
217
218
219
220
221
222

```puppet
freeradius::cert { 'mycert.pem':
  source => 'puppet:///modules/site_freeradius/mycert.pem',
  type   => 'key',
}
```

223
224
225
226
227
228
229
```puppet
freeradius::cert { 'mycert.pem':
  content => '<your key/cert content here>',
  type    => 'key',
}
```

230
231
232
233
##### `type`

Set file permissions on the installed certificate differently depending on whether this is a private key or a public certificate. Note that the default is to treat the file as a private key and remove world-readable privileges. Allowable values: `cert`, `key`. Default: `key`.

234
235
236
237
#### `freeradius::client`

Define RADIUS clients as seen in `clients.conf`

238
```puppet
Jonathan Gazeley's avatar
Jonathan Gazeley committed
239
# Single host example
Jonathan Gazeley's avatar
Jonathan Gazeley committed
240
241
freeradius::client { "wlan-controller01":
  ip        => '192.168.0.1',
242
  secret    => 'testing123',
Jonathan Gazeley's avatar
Jonathan Gazeley committed
243
  shortname => 'wlc01',
244
  nastype   => 'other',
Jonathan Gazeley's avatar
Jonathan Gazeley committed
245
246
247
  port      => '1645-1646',
  firewall  => true,
}
248
249
```

Jonathan Gazeley's avatar
Jonathan Gazeley committed
250
```puppet
251
# Range example
Jonathan Gazeley's avatar
Jonathan Gazeley committed
252
253
254
255
256
257
258
259
260
261
freeradius::client { "wlan-controllers":
  ip        => '192.168.0.0/24',
  secret    => 'testing123',
  shortname => 'wlc01',
  nastype   => 'other',
  port      => '1645-1646',
  firewall  => true,
}
```

262
##### `ip`
263
The IP address of the client or range in CIDR format. For IPv6, use `ipv6addr`. `ip` and `ip6` are mutually exclusive but one must be supplied.
264
Default: `undef`.
265
266

##### `ip6`
267
The IPv6 address of the client or range in CIDR format. `ip` and `ip6` are mutually exclusive but one must be supplied. Default: `undef`.
Jonathan Gazeley's avatar
Jonathan Gazeley committed
268

269
##### `shortname`
270
A short alias that is used in place of the IP address or fully qualified hostname provided in the first line of the section. Required.
271
272

##### `secret`
273
The RADIUS shared secret used for communication between the client/NAS and the RADIUS server. Required.
274
275

##### `virtual_server`
276
The virtual server that traffic from this client should be sent to. Default: `undef`.
277
278

##### `nastype`
279
The `nastype` attribute is used to tell the `checkrad.pl` script which NAS-specific method it should use when checking simultaneous use. See [`man clients.conf`](http://freeradius.org/radiusd/man/clients.conf.txt) for a list of all options. Default: `undef`.
280
281

##### `port`
Jonathan Gazeley's avatar
Jonathan Gazeley committed
282
The UDP port that this virtual server should listen on. Leave blank if this client is not tied to a virtual server. Currently the port number is only used to create firewall exceptions and you only need to specify it if you set `firewall => true`. Use port range syntax as in [`puppetlabs-firewall`](https://forge.puppetlabs.com/puppetlabs/firewall). Default: `undef`.
283

284
285
##### `firewall`
Create a firewall exception for this virtual server. If this is set to `true`, you must also supply `port` and either `ip` or `ip6`. Default: `false`.
286

287
288
289
##### `attributes`
Array of attributes to assign to this client. Default: empty.

290
291
292
293
#### `freeradius::config`

Install arbitrary config snippets from a flat file. These are installed in `/etc/raddb/conf.d`

294
```puppet
295
296
297
298
299
freeradius::config { 'realm-checks.conf':
  source => 'puppet:///modules/site_freeradius/realm-checks.conf',
}
```

300
301
302
303
304
305
```puppet
freeradius::config { 'realm-checks.conf':
  content => template('your_template),
}
```

306
307
308
309
310
311
312
313
314
#### `freeradius::dictionary`

Install custom dictionaries without breaking the default FreeRADIUS dictionary. Custom dictionaries are installed in `/etc/raddb/dictionary.d` and automatically included in the global dictionary.

```puppet
freeradius::dictionary { 'mydict':
  source => 'puppet:///modules/site_freeradius/dictionary.mydict',
}
```
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
#### `freeradius::home_server`

This section defines a "Home Server" which is another RADIUS server that gets sent proxied requests.

##### `secret`

The shared secret use to "encrypt" and "sign" packets between FreeRADIUS and the home server.

##### `type`

Home servers can be sent Access-Request packets or Accounting-Request packets. Allowed values are:
* `auth` Handles Access-Request packets
* `acct`  Handles Accounting-Request packets
* `auth+acct` Handles Access-Request packets at "port" and Accounting-Request packets at "port + 1"
* `coa` Handles CoA-Request and Disconnect-Request packets.

Default: `auth`

##### `ipaddr`

IPv4 address or hostname of the home server. Specify one of `ipaddr`, `ipv6addr` or `virtual_server`

##### `ipv6addr`

IPv6 address or hostname of the home server. Specify one of `ipaddr`, `ipv6addr` or `virtual_server`

##### `virtual_server`

If you specify a virtual_server here, then requests will be proxied internally to that virtual server.
These requests CANNOT be proxied again, however. The intent is to have the local server handle packets
when all home servers are dead. Specify one of `ipaddr`, `ipv6addr` or `virtual_server`

##### `port`

The port to which packets are sent. Usually 1812 for type "auth", and  1813 for type "acct".
Older servers may use 1645 and 1646. Use 3799 for type "coa" Default: `1812`

##### `proto`
The transport protocol. If unspecified, defaults to "udp", which is the traditional
RADIUS transport. It may also be "tcp", in which case TCP will be used to talk to
this home server. Default: `udp`

357
358
359
360
##### `status_check`
Type of check to see if the home_server is dead or alive. Valid values are `none`, `status-server`
and `request`. Default: `undef`.

361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396

#### `freeradius::home_server_pool`

##### `home_server`

An array of one or more home servers. The names of the home servers are NOT the hostnames, but the names
of the sections. (e.g. `home_server foo {...}` has name "foo".

Note that ALL home servers listed here have to be of the same type. i.e. they all have to be "auth", or they all have to
be "acct", or they all have to be "auth+acct".


##### `type`

The type of this pool controls how home servers are chosen.

* `fail-over` the request is sent to the first live home server in the list.  i.e. If the first home server is marked "dead", the second one is chosen, etc.
* `load-balance` the least busy home server is chosen For non-EAP auth methods, and for acct packets, we recommend using "load-balance". It will ensure the highest availability for your network. 
* `client-balance` the home server is chosen by hashing the source IP address of the packet. This configuration is most useful to do simple load balancing for EAP sessions
* `client-port-balance` the home server is chosen by hashing the source IP address and source port of the packet.
* `keyed-balance` the home server is chosen by hashing (FNV) the contents of the Load-Balance-Key attribute from the control items.

The default type is `fail-over`.

##### `virtual_server`

A `virtual_server` may be specified here.  If so, the "pre-proxy" and "post-proxy" sections are called when
the request is proxied, and when a response is received.

##### `fallback`

If ALL home servers are dead, then this "fallback" home server is used. If set, it takes precedence over any realm-based
fallback, such as the DEFAULT realm.

For reasons of stability, this home server SHOULD be a virtual server. Otherwise, the fallback may itself be dead!

397

398
399
#### `freeradius::instantiate`

Jonathan Gazeley's avatar
Jonathan Gazeley committed
400
401
Instantiate a module that is not automatically instantiated.

402
```puppet
Jonathan Gazeley's avatar
Jonathan Gazeley committed
403
404
freeradius::instantiate { 'mymodule': }
```
405

406
407
408
409
410
411
412
413
414
415
416
417
418
419
#### `freeradius::ldap`

Configure LDAP support for FreeRADIUS

##### `identity`
LDAP account for searching the directory. Required.

##### `password`
Password for the `identity` account. Required.

##### `basedn`
Unless overridden in another section, the dn from which all searches will start from. Required.

##### `server`
420
421
Array of hostnames or IP addresses of the LDAP server(s). Note that this needs to match the name(s) in the LDAP
server certificate, if you're using ldaps. Default: [`localhost`]
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453

##### `port`
Port to connect to the LDAP server on. Default: `389`

##### `uses`
How many times the connection can be used before being re-established. This is useful for things
like load balancers, which may exhibit sticky behaviour without it. `0` is unlimited. Default: `0`

##### `idle`
Sets the idle time before keepalive probes are sent. Default `60`

This option may not be supported by your LDAP library. If this configuration entry appears in the
output of `radiusd -X` then it is supported. Otherwise, it is unsupported and changing it will do nothing.

##### `probes`
Sets the maximum number of keepalive probes TCP should send before dropping the connection. Default: `3`

This option may not be supported by your LDAP library. If this configuration entry appears in the
output of `radiusd -X` then it is supported. Otherwise, it is unsupported and changing it will do nothing.

##### `interval`
Setss the interval in seconds between individual keepalive probes. Default: `3`

This option may not be supported by your LDAP library. If this configuration entry appears in the
output of `radiusd -X` then it is supported. Otherwise, it is unsupported and changing it will do nothing.

##### `timeout`
Number of seconds to wait for LDAP query to finish. Default: `10`

##### `start`
Connections to create during module instantiation. If the server cannot create specified number of
connections during instantiation it will exit. Set to 0 to allow the server to start without the
454
directory being available. Default: `${thread[pool].start_servers}`
455
456

##### `min`
457
Minimum number of connections to keep open. Default: `${thread[pool].min_spare_servers}`
458
459
460
461
462

##### `max`
Maximum number of connections. Default: `${thread[pool].max_servers}`

##### `spare`
463
Spare connections to be left idle. Default: `${thread[pool].max_spare_servers}`
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488

##### `starttls`
Set this to 'yes' to use TLS encrypted connections to the LDAP database by using the StartTLS extended operation.
The StartTLS operation is supposed to be used with normal ldap connections instead of using ldaps (port 636) connections

Default: `no`

##### `cafile`
Path to CA cert file for TLS

##### `certfile`
Path to cert file for TLS

##### `keyfile`
Path to key file for TLS

##### `requirecert`
Certificate Verification requirements. Choose from:
'never' (do not even bother trying)
'allow' (try, but don't fail if the certificate cannot be verified)
'demand' (fail if the certificate does not verify)
'hard'  (similar to 'demand' but fails if TLS cannot negotiate)

Default: `allow`

489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
#### `freeradius::krb5`
Configure Kerberos support for FreeRADIUS

##### `keytab`
Full path to the Kerberos keytab file

##### `principal`
Name of the service principal

##### `start`
Connections to create during module instantiation. If the server cannot create specified number of
connections during instantiation it will exit. Set to 0 to allow the server to start without the
directory being available. Default: `${thread[pool].start_servers}`

##### `min`
Minimum number of connections to keep open. Default: `${thread[pool].min_spare_servers}`

##### `max`
Maximum number of connections. Default: `${thread[pool].max_servers}`

##### `spare`
Spare connections to be left idle. Default: `${thread[pool].max_spare_servers}`
511

512
#### `freeradius::module`
513

514
Install a module from a flat file, or enable a stock module that came with your distribution of FreeRADIUS.
515

516
```puppet
517
518
519
520
521
522
523
524
# Enable a stock module
freeradius::module { 'pap':
  preserve => true,
}
```

```puppet
# Install a custom module from a flat file
525
526
527
528
529
freeradius::module { 'buffered-sql':
  source => 'puppet:///modules/site_freeradius/buffered-sql',
}
```

530
```puppet
531
# Install a custom module from a template
532
533
534
535
536
freeradius::module { 'buffered-sql':
  content => template('some_template.erb)',
}
```

537
538
539
540
#### `freeradius::policy`

Install a policy from a flat file.

541
```puppet
542
543
544
545
546
freeradius::policy { 'my-policies':
  source => 'puppet:///modules/site_freeradius/my-policies',
}
```

547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
#### `freeradius::realm`

Define a realm in `proxy.conf`. Realms point to pools of home servers.

##### `virtual_server`

Set this to "proxy" requests internally to a virtual server. The pre-proxy and post-proxy sections are run just as with any
other kind of home server.  The virtual server then receives the request, and replies, just as with any other packet.
Once proxied internally like this, the request CANNOT be proxied internally or externally.

##### `auth_pool`

For authentication, the `auth_pool` configuration item should point to a `home_server_pool` that was previously
defined.  All of the home servers in the `auth_pool` must be of type `auth`.

##### `acct_pool`

For accounting, the `acct_pool` configuration item should point to a `home_server_pool` that was previously
defined.  All of the home servers in the `acct_pool` must be of type `acct`.

##### `pool`

If you have a `home_server_pool` where all of the home servers are of type `auth+acct`, you can just use the `pool`
configuration item, instead of specifying both `auth_pool` and `acct_pool`.

##### `nostrip`

Normally, when an incoming User-Name is matched against the realm, the realm name is "stripped" off, and the "stripped"
user name is used to perform matches.If you do not want this to happen, set this to `true`. Default: `false`.


578
579
580
581
582
#### `freeradius::script`

Install a helper script, e.g. which might be called upon by a virtual server. These are
placed in `/etc/raddb/scripts` and are not automatically included by the server.

583
```puppet
Jonathan Gazeley's avatar
Jonathan Gazeley committed
584
freeradius::script{ 'myperlscript.pl':
Jonathan Gazeley's avatar
Jonathan Gazeley committed
585
586
587
588
  source => 'puppet:///modules/site_freeradius/myperlscript.pl',
}
```

589
590
#### `freeradius::site`

Jonathan Gazeley's avatar
Jonathan Gazeley committed
591
Install a virtual server (a.k.a. site) from a flat file. Sites are installed directly
592
593
into `/etc/raddb/sites-enabled`. Any files in this directory that are *not* managed by
Puppet will be removed.
594

595
```puppet
596
597
598
599
600
freeradius::site { 'inner-tunnel':
  source => 'puppet:///modules/site_freeradius/inner-tunnel',
}
```

601
602
603
604
605
606
#### `freeradius::sql`

Configure SQL connections. You can define multiple database connections by
invoking this resource multiple times. If you are using MySQL, don't forget to
also set `mysql_support => true` in the base `freeradius` class.

607
608
609
610
611
612
613
614
615
616
```puppet
freeradius::sql { 'mydatabase':
  database  => 'mysql',
  server    => '192.168.0.1',
  login     => 'radius',
  password  => 'topsecret',
  radius_db => 'radius',
}
```

617
618
619
620
621
622
623
624
##### `database`

Default: `undef`. Required. Specify which FreeRADIUS database driver to use. Choose one of `mysql`, `mssql`, `oracle`, `postgresql`

##### `server`

Default: `localhost`. Specify hostname of IP address of the database server.

625
626
627
628
##### `port`

TCP port to connect to the database. Default: `3306`.

629
630
631
632
633
634
635
636
637
638
639
640
641
##### `login`

Default: `radius`. Username to connect to the databae.

##### `password`

Default: `undef`. Required. Password to connect to the database.

##### `radius_db`

Default: `radius`. Name of the database. Normally you should leave this alone. If you are using Oracle then use this instead:
`(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521))(CONNECT_DATA=(SID=your_sid)))`.

642
643
644
645
646
647
648
649
##### `num_sql_socks`

Default: same as `max_servers`. Number of sql connections to make to the database server. 
Setting this to LESS than the number of threads means that some threads may starve, and
you will see errors like "No connections available and at max connection limit". Setting
this to MORE than the number of threads means that there are more connections than necessary.
Leave blank to set it to the same value as the number of threads.

650
651
652
653
654
655
656
657
658
659
##### `lifetime`

Default: `0`. Lifetime of an SQL socket. If you are having network issues such as TCP sessions expiring, you may need to set the socket
lifetime. If set to non-zero, any open connections will be closed `$lifetime` seconds after they were first opened.

##### `max_queries`

Default: `0`. Maximum number of queries used by an SQL socket. If you are having issues with SQL sockets lasting "too long", you can
limit the number of queries performed over one socket. After `$max_qeuries`, the socket will be closed. Use 0 for "no limit".

660
661
##### `query_file`

662
663
**`query_file` has been deprecated - use `custom_query_file` instead**

664
665
666
667
668
669
670
671
Default: `sql/${database}/dialup.conf`. Relative path to the file which contains your SQL queries. By
default, points to the `dialup.conf` specific to your database engine, so leave this blank if you are
using stock queries.

If you need to use custom queries, it is recommended that you deploy your query file using
`freeradius::script` to install the file into `/etc/raddb/scripts/custom_dialup.conf` and then
set `query_file` to `scripts/custom_dialup.conf`.

672
673
674
675
676
677
678
##### `custom_query_file`

Default: `null`. Puppet fileserver path to a file which contains your SQL queries, i.e. `dialup.conf`. This
option is intended to be a replacment for `query_file`, which requires separate deployment of the file. This
option allows you to specify a Puppet-managed custom `dialup.conf` which is installed and loaded automatically.
`query_file` must be left blank if you use `custom_query_file`.

679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
##### `acct_table1`

If you want both stop and start records logged to the same SQL table, leave this as is.  If you want them in
different tables, put the start table in `$acct_table1` and stop table in `$acct_table2`. Default : `radacct`

##### `acct_table2`

If you want both stop and start records logged to the same SQL table, leave this as is.  If you want them in
different tables, put the start table in `$acct_table1` and stop table in `$acct_table2`. Default : `radacct`

##### `postauth_table`

Table for storing data after authentication

##### `authcheck_table`

Default: `radcheck`

##### `authreply_table`

Default: `radreply`

##### `groupcheck_table`

Default: `radgroupcheck`

##### `groupreply_table`

Default: `radgroupreply`

##### `usergroup_table`

Table to keep group info. Default: `radusergroup`

##### `read_groups`

If set to `yes` (default) we read the group tables. If set to `no` the user MUST have `Fall-Through = Yes`
in the radreply table. Default: `yes`.

##### `deletestalesessions`

Remove stale session if checkrad does not see a double login. Default: `yes`.

##### `sqltrace`

Print all SQL statements when in debug mode (-x). Default: `no`.

##### `sqltracefile`

Location for SQL statements to be stored if `$sqltrace = yes`. Default:
Jonathan Gazeley's avatar
Jonathan Gazeley committed
729
`${logdir}/sqllog.sql`
730
731
732
733
734
735
736
737
738
739
740
741
742

##### `connect_failure_retry_delay`

Number of seconds to dely retrying on a failed database connection (per socket). Default: `60`.

##### `nas_table`

Table to keep radius client info. Default: `nas`.

#### `readclients`

Set to `yes` to read radius clients from the database (`$nas_table`) Clients will ONLY be read on server startup. For performance
and security reasons, finding clients via SQL queries CANNOT be done "live" while the server is running. Default: `no`.
743

744
745
746
747
748
#### `freeradius::statusclient`

Define RADIUS clients, specifically to connect to the status server for monitoring.
Very similar usage to `freeradius::client` but with fewer options.

749
##### `ip`
750
Default: `undef`. The IP address of the client in CIDR format.  For IPv6, use `ipv6addr`. `ip` and `ip6` are mutually exclusive but one must be supplied.
751
752

##### `ip6`
753
Default: `undef`. The IPv6 address of the client in CIDR format. `ip` and `ip6` are mutually exclusive but one must be supplied.
754
755
756
757
758
759
760
761
762

##### `secret`
required. The RADIUS shared secret used for communication between the client/NAS and the RADIUS server.

##### `port`
Default: `undef`. The UDP port that this virtual server should listen on. Leave blank if this client is not tied to a virtual server.

##### `shortname`
required. A short alias that is used in place of the IP address or fully qualified hostname provided in the first line of the section.
763

764
765
766
767
768
769
770
771
772
773
774
#### `freeradius::template`

Define template items that can be referred to in other config items

##### `source`

Provide source to a file with the template item. Specify only one of `source` or `content`.

##### `content`

Provide content of template item. Specify only one of `source` or `content`.
775

776
777
778
779
780
781
#### `freeradius::virtual_module`

Define a virtual module which consists of one or more other modules, for failover or
load-balancing purposes.

##### `submodules`
Jonathan Gazeley's avatar
Jonathan Gazeley committed
782
783
784

Provide an array of submodules which will be loaded into this virtual module. Required.

785
786
##### `type`

Jonathan Gazeley's avatar
Jonathan Gazeley committed
787
788
789
790
791
Select the type of virtual module from `redundant`, `load-balance`, `redundant-load-balance`
or `group`. See [virtual modules](http://wiki.freeradius.org/config/Fail-over#virtual-modules)
and [load-balancing](http://wiki.freeradius.org/config/load-balancing) for more details.


792
```puppet
Jonathan Gazeley's avatar
Jonathan Gazeley committed
793
# Load virtual module myldap
794
795
796
797
798
799
freeradius::virtual_module { 'myldap':
  submodules => ['ldap1', 'ldap2'],
  type       => 'redundant-load-balance',
}
```

800
801
## Limitations

802
803
804
805
This module is targeted at FreeRADIUS 3.x running on CentOS 7. It will not work on
FreeRADIUS 2.x. It has not been thoroughly tested on other distributions, but
might work. Likely sticking points with other distros are the names of packages,
services and file paths.
806
807
808

This module was written for use with Puppet 3.6 and 3.7, but should be quite agnostic
to new versions of Puppet.
809
810
811

## Development

812
813
814
815
This module was written primarily for internal use - features we haven't needed to
use probably haven't been written. Please send pull requests with new features and
bug fixes. You are also welcome to file issues but I make no guarantees of
development effort if the features aren't useful to my employer.
816

817
## Release Notes
818

Jonathan Gazeley's avatar
Jonathan Gazeley committed
819
820
821
### 2.3.1
  * Fix bug with log rotation throwing errors when radiusd is not running

Jonathan Gazeley's avatar
Jonathan Gazeley committed
822
823
824
### 2.3.0
  * Add support to configure virtual modules for fail-over and load-balancing

Jonathan Gazeley's avatar
Jonathan Gazeley committed
825
826
827
### 2.2.0
  * Add support to configure the krb5 module

Jonathan Gazeley's avatar
Jonathan Gazeley committed
828
829
830
### 2.1.4
  * Fix compatibility with Puppet 4

Jonathan Gazeley's avatar
Jonathan Gazeley committed
831
832
833
### 2.1.3
  * Fix compatibility with Puppet 4

Jonathan Gazeley's avatar
Jonathan Gazeley committed
834
835
836
### 2.1.2
  * Write out ldap config with different syntax for FreeRADIUS 3.0.x and 3.1.x when using multiple servers

Jonathan Gazeley's avatar
Jonathan Gazeley committed
837
838
839
840
### 2.1.1

  * Fix bug with the facts not reporting version numbers accurately

Jonathan Gazeley's avatar
Jonathan Gazeley committed
841
842
843
844
### 2.1.0

  * Various changes to preserve stock modules in a FreeRADIUS installation and be able to toggle them

Jonathan Gazeley's avatar
Jonathan Gazeley committed
845
846
847
848
849
850
851
852
### 2.0.1

  * Fix up LDAP template to allow better compatibility with FreeRADIUS 3.1.x

### 2.0.0

  * Drop support for FreeRADIUS 2.x, enabling us to keep the codebase tidier

Jonathan Gazeley's avatar
Jonathan Gazeley committed
853
854
855
856
### 1.3.0

  * Add support for defining config templates

Jonathan Gazeley's avatar
Jonathan Gazeley committed
857
858
859
860
### 1.2.6

  * Fix a bug that now enables sqltrace (sqllog) to work on FR3

Jonathan Gazeley's avatar
Jonathan Gazeley committed
861
862
863
864
### 1.2.5

  * Switch to use [saz/rsyslog](https://forge.puppetlabs.com/saz/rsyslog) to manage syslog rules

Jonathan Gazeley's avatar
Jonathan Gazeley committed
865
866
867
868
### 1.2.4

  * Start with just 1 SQL socket by default to avoid overloading the SQL server

Jonathan Gazeley's avatar
Jonathan Gazeley committed
869
870
871
872
### 1.2.3

  * Make facts fail gracefully if radiusd is not installed

Jonathan Gazeley's avatar
Jonathan Gazeley committed
873
874
875
876
### 1.2.2

  * Fix a bug that stops statusclients from working

Jonathan Gazeley's avatar
Jonathan Gazeley committed
877
878
879
880
### 1.2.1

  * Fix a bug that prevent 1.2.0 from working on FreeRADIUS 2

Jonathan Gazeley's avatar
Jonathan Gazeley committed
881
882
883
884
### 1.2.0

 * Deprecate `netmask` parameter from `freeradius::client`

Jonathan Gazeley's avatar
Jonathan Gazeley committed
885
886
887
888
### 1.1.0

 * Add support to supply an array of multiple LDAP servers

Jonathan Gazeley's avatar
Jonathan Gazeley committed
889
890
891
892
### 1.0.4

 * Make an educated guess about the version of FR when the fact is unavailable (e.g. on the first Puppet run)

Jonathan Gazeley's avatar
Jonathan Gazeley committed
893
894
895
896
### 1.0.3

 * Iron out a couple of issues with LDAP compatibility with Active Directory

Jonathan Gazeley's avatar
Jonathan Gazeley committed
897
898
899
900
### 1.0.2

 * Fixed a bug that prevented LDAP from working on any port except 389

Jonathan Gazeley's avatar
Jonathan Gazeley committed
901
902
903
904
### 1.0.1

 * Fixed a bug that caused an error when no proxy config items were defined

Jonathan Gazeley's avatar
Jonathan Gazeley committed
905
906
907
908
909
910
911
912
913
914
### 1.0.0

 * Support for FreeRADIUS 3
 * Native support for managing the LDAP module
 * Native support for configuring realms (via realms, home_server and home_server_pool)
 * Improved handling of attribute filtering
 * Improved handling of SQL support

This release retains support for FreeRADIUS 2 but some of the parameters have changed so you will probably need to make changes to the way you use this module. Upgrade on a dev system first!

Jonathan Gazeley's avatar
Jonathan Gazeley committed
915
916
917
918
### 0.4.5

 * Tweak wildcard matching on logrotate config

Jonathan Gazeley's avatar
Jonathan Gazeley committed
919
920
921
922
### 0.4.4

 * Fix bug displaying deprecation notice and update documentation to reflect this

Jonathan Gazeley's avatar
Jonathan Gazeley committed
923
924
925
926
### 0.4.3

 * Manage log rotation with [rodjek/logrotate](https://forge.puppetlabs.com/rodjek/logrotate) instead of deploying flat files

Jonathan Gazeley's avatar
Jonathan Gazeley committed
927
928
929
930
### 0.4.2

 * Provide new SQL option custom_query_file

931
932
933
934
935
### 0.4.1

 * Cease management of custom logging modules `logtofile` and `logtosyslog` since it does not make sense to manage these globally 
 * Purge instantiation of unused modules

Jonathan Gazeley's avatar
Jonathan Gazeley committed
936
937
938
939
### 0.4.0

 * Move control_socket into its own class and add parameters
 * Improve the way the status_server is added or removed
Jonathan Gazeley's avatar
Jonathan Gazeley committed
940
 * Delete all unmanaged sites from sites-available
Jonathan Gazeley's avatar
Jonathan Gazeley committed
941

Jonathan Gazeley's avatar
Jonathan Gazeley committed
942
943
944
945
### 0.3.8

 * Purge all non-managed sites

Jonathan Gazeley's avatar
Jonathan Gazeley committed
946
947
948
949
950
### 0.3.7

 * Minor linting of code to improve score
 * Minor linting of metadata to improve score

Jonathan Gazeley's avatar
Jonathan Gazeley committed
951
952
953
954
### 0.3.6

 * Bugfixes and feature improvements in `freeradius::sql`

955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
### 0.3.5

 * Add ability to customise SQL socket lifetimes
 * Purge all non-managed clients
 * Add defined type to blank out unneeded config files without deleting them

### 0.3.4

 * Correctly pass template content to control-socket

### 0.3.3

 * The default behaviour is now to purge anything in ${confdir}/certs that is not managed by Puppet

### 0.3.2

 * Various improvements to support Debian family
 * Optional content parameters in various resources

### 0.3.1

 * Fix a bug which prevents the module from working properly on Debian/Ubuntu (thanks @diranged)

Jonathan Gazeley's avatar
Jonathan Gazeley committed
978
979
980
981
### 0.3.0

 * Add `ensure` parameter to all defined types

Jonathan Gazeley's avatar
Jonathan Gazeley committed
982
983
984
985
### 0.2.0

 * Add support for customising `sql.conf` natively by adding `freeradius::sql`

986
987
988
989
### 0.1.4

 * Fix ambiguity about net/netmask in freeradius::client

Jonathan Gazeley's avatar
Jonathan Gazeley committed
990
991
992
993
994
995
996
### 0.1.3

 * Add support for managing firewall rules automatically
 * Add support for installation certificates & keys
 * Make syslog support an optional component
 * Various bugfixes

Jonathan Gazeley's avatar
Jonathan Gazeley committed
997
998
999
1000
1001
1002
1003
### 0.1.2

 * Improved modular installs with optional components
 * Improved support for Debian
 * Clarify dependencies on other modules
 * Lots of bugfixes

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1004
1005
1006
1007
1008
### 0.1.0

 * Initial release with support for installing FreeRADIUS and configuring servers, modules, clients and other objects using flat files.
 * Probably works only with FreeRADIUS 2.x
 * Only tested with CentOS 6
Jonathan Gazeley's avatar
Jonathan Gazeley committed
1009