README.md 43 KB
Newer Older
Jonathan Gazeley's avatar
Jonathan Gazeley committed
1
# freeradius
Jonathan's avatar
Jonathan committed
2

3
4
5
6
#### Table of Contents

1. [Overview](#overview)
2. [Module Description - What the module does and why it is useful](#module-description)
7
3. [Usage - Configuration options and additional functionality](#usage)
8
9
    * [Classes](#classes)
       * [`freeradius`](#freeradius)
Jonathan Gazeley's avatar
Jonathan Gazeley committed
10
       * [`freeradius::status_server`](#freeradiusstatus_server)
11
       * [`freeradius::control_socket`](#freeradiuscontrol_socket)
12
    * [Resources](#resources)
13
       * [`freeradius::attr`](#freeradiusattr)
14
       * [`freeradius::blank`](#freeradiusblank)
15
       * [`freeradius::cert`](#freeradiuscert)
16
17
18
       * [`freeradius::client`](#freeradiusclient)
       * [`freeradius::config`](#freeradiusconfig)
       * [`freeradius::dictionary`](#freeradiusdictionary)
19
20
       * [`freeradius::home_server`](#freeradiushomeserver)
       * [`freeradius::home_server_pool`](#freeradiushomeserverpool)
21
       * [`freeradius::instantiate`](#freeradiusinstantiate)
22
       * [`freeradius::ldap`](#freeradiusldap)
23
       * [`freeradius::module::ldap`](#freeradiusmoduleldap)
24
       * [`freeradius::krb5`](#freeradiuskrb5)
25
       * [`freeradius::module`](#freeradiusmodule)
26
       * [`freeradius::module::ippool`](#freeradiusmoduleippool)
27
       * [`freeradius::policy`](#freeradiuspolicy)
28
       * [`freeradius::realm`](#freeradiusrealm)
29
       * [`freeradius::site`](#freeradiussite)
Jonathan Gazeley's avatar
Jonathan Gazeley committed
30
       * [`freeradius::sql`](#freeradiussql)
31
       * [`freeradius::statusclient`](#freeradiusstatusclient)
32
       * [`freeradius::template`](#freeradiustemplate)
33
       * [`freeradius::virtual_module`](#freeradiusvirtual_module)
34
35
36
4. [Limitations - OS compatibility, etc.](#limitations)
5. [Development - Guide for contributing to the module](#development)
6. [Release Notes](#release-notes)
37
38
39

## Overview

40
This module installs and configures [FreeRADIUS](http://freeradius.org/) server
41
on Linux. It supports FreeRADIUS 3.x only. It was designed with CentOS in mind
Jonathan Gazeley's avatar
Jonathan Gazeley committed
42
43
44
45
but should work on other distributions. Please note that at this time, current
versions of Debian and Ubuntu still package FreeRADIUS 2.2.x which is end-of-life.
If you use Debian or Ubuntu, you will need to use version 1.x of this module,
which itself is no longer maintained.
46

47
48
49
50
This module requires Puppet 4.0.0 or greater. Puppet 3.x was
[discontinued](https://puppet.com/misc/puppet-enterprise-lifecycle) at
the end of 2016.

Jonathan Gazeley's avatar
Jonathan Gazeley committed
51
52
53
54
55
56
| `jgazeley/freeradius` | FreeRADIUS  |
| --------------------- | ----------- |
| 2.x                   | 3.x         |
| 1.x                   | 2.x and 3.x |
| 0.x                   | 2.x         |

57
58
## Module Description

59
60
61
62
63
64
This module installs FreeRADIUS from a distro-provided package and installs a
number of customised config files to enable flexibility. It then provides some
helpers to allow you to easily configure virtual servers (sites), modules, clients
and other config items. Most of these items accept a flat config file which you
supply either as a static file or a template - similar to the `source` and `content`
parameters in Puppet's `file` resource.
65

66
67
68
This module is designed to make it more straightforward for RADIUS administrators to
deploy RADIUS servers using Puppet. This module does not serve as a wizard and does
not avoid having to have an understanding of FreeRADIUS.
69
70


71
## Usage
72

73
This module provides several classes and defined types which take parameters.
74

75
### Classes
76

77
#### `freeradius`
78

79
80
The `freeradius` class installs the base server. In the early releases, this class does not
have many parameters as most values are hard-coded. I am working on parameterising more
81
82
of the global settings to increase flexibility. Patches are welcome.

83
##### `control_socket`
84
Use of the control_socket parameter in the freeradius class is deprecated. Use the `freeradius::control_socket` class instead.
85

86
87
88
##### `correct_escapes`
Use correct backslash escaping in unlang. Default: `true`

89
90
91
92
93
94
95
##### `max_requests`
The maximum number of requests which the server keeps track of. This should be 256 multiplied by the number of clients. Default: `4096`

##### `max_servers`
Limit on the total number of servers running. Default: `4096`

##### `mysql_support`
96
Install support for MySQL. Note this only installs the package. Use `freeradius::sql` to configure SQL support. Default: `false`
97
98
99
100

##### `perl_support`
Install support for Perl. Default: `false`

101
102
103
##### `preserve_mods`
Leave recommended stock modules enabled. Default: `true`

104
105
106
107
108
109
##### `utils_support`
Install FreeRADIUS utils. Default: `false`

##### `ldap_support`
Install support for LDAP. Default: `false`

110
111
112
##### `krb5_support`
Install support for Kerberos. Default: `false`

113
##### `wpa_supplicant`
114
115
Install wpa_supplicant utility. Default: `false`

116
##### `winbind_support`
117
Add the radius user to the winbind privileged group. You must install winbind separately. Default: `false`.
118

119
120
121
##### `log_destination`
Configure destination of log messages. Valid values are `files`, `syslog`, `stdout` and `stderr`. Default: `files`.

122
##### `syslog`
123
Add a syslog rule (using the `saz/rsyslog` module). Default: `false`.
124

125
126
127
##### `log_auth`
Log authentication requests (yes/no). Default: `no`.

Jonathan Gazeley's avatar
Jonathan Gazeley committed
128
129
```puppet
class { 'freeradius':
130
131
132
133
134
135
136
  max_requests    => 4096,
  max_servers     => 4096,
  mysql_support   => true,
  perl_support    => true,
  utils_support   => true,
  wpa_supplicant  => true,
  winbind_support => true,
137
  syslog          => true,
138
  log_auth        => 'yes',
Jonathan Gazeley's avatar
Jonathan Gazeley committed
139
140
141
}
```

142
143
#### `freeradius::status_server`

144
145
The `freeradius::status_server` class enabled the [status server](http://wiki.freeradius.org/config/Status).
To remove the status server, do not include this class and the server will be removed.
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163

##### `secret`
The shared secret for the status server. Required.

##### `port`
The port to listen for status requests on. Default: `18121`

##### `listen`
The address to listen on. Defaults to listen on all addresses but you could set this to `$::ipaddress` or `127.0.0.1`.  Default: `*`

```puppet
  # Enable status server
  class { 'freeradius::status_server':
    port   => '18120',
    secret => 't0pSecret!',
  }
```

164
165
166
167
168
169
170
171
#### `freeradius::control_socket`

The `freeradius::control_socket` class enables the control socket which can be used with [RADMIN](http://freeradius.org/radiusd/man/radmin.html).
To remove the control socket, do not include this class and the socket will be removed.

##### `mode`
Whether the control socket should be read-only or read-write. Choose from `ro`, `rw`. Default: `ro`.

Jonathan Gazeley's avatar
Jonathan Gazeley committed
172
173
174
175
176
177
178
```puppet
  # Enable control socket
  class { 'freeradius::control_socket':
    mode => 'ro',
  }
```

179
### Resources
180

181
#### `freeradius::attr`
182

183
Install arbitrary attribute filters from a flat file. These are installed in an appropriate module config directory.
184
The contents of the `attr_filter` module are automatically updated to reference the filters.
185
186
187
188

##### `key`

Specify a RADIUS attribute to be the key for this attribute filter. Enter only the string part of the name.
Jonathan Gazeley's avatar
Jonathan Gazeley committed
189

190
191
192
193
194
##### `prefix`

Specify the prefix for the attribute filter name before the dot, e.g. `filter.post_proxy`. This is usually set
to `filter` on FR2 and `attr_filter` on FR3. Default: `filter`.

195
```puppet
Jonathan Gazeley's avatar
Jonathan Gazeley committed
196
freeradius::attr { 'eduroamlocal':
197
  key    => 'User-Name',
198
  prefix => 'attr_filter',
Jonathan Gazeley's avatar
Jonathan Gazeley committed
199
200
201
  source => 'puppet:///modules/site_freeradius/eduroamlocal',
}
```
202

203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
#### `freeradius::blank`

Selectively blank certain stock config files that aren't required. This is preferable to deleting them
because the package manager will replace certain files next time the package is upgraded, potentially
causing unexpected behaviour.

The resource title should be the relative path from the FreeRADIUS config directory to the file(s) you
want to blank. You can pass multiple files in an array.

```puppet
freeradius::blank { 'sites-enabled/default': }

freeradius::blank { [
  'sites-enabled/default',
  'eap.conf',
]: }
```

221
222
#### `freeradius::cert`

223
Install certificates as provided. These are installed in `/etc/raddb/certs`. Beware that any certificates *not* deployed by Puppet will be purged from this directory.
224
225
226
227
228
229
230
231

```puppet
freeradius::cert { 'mycert.pem':
  source => 'puppet:///modules/site_freeradius/mycert.pem',
  type   => 'key',
}
```

232
233
234
235
236
237
238
```puppet
freeradius::cert { 'mycert.pem':
  content => '<your key/cert content here>',
  type    => 'key',
}
```

239
240
241
242
##### `type`

Set file permissions on the installed certificate differently depending on whether this is a private key or a public certificate. Note that the default is to treat the file as a private key and remove world-readable privileges. Allowable values: `cert`, `key`. Default: `key`.

243
244
245
246
#### `freeradius::client`

Define RADIUS clients as seen in `clients.conf`

247
```puppet
Jonathan Gazeley's avatar
Jonathan Gazeley committed
248
# Single host example
Jonathan Gazeley's avatar
Jonathan Gazeley committed
249
250
freeradius::client { "wlan-controller01":
  ip        => '192.168.0.1',
251
  secret    => 'testing123',
Jonathan Gazeley's avatar
Jonathan Gazeley committed
252
  shortname => 'wlc01',
253
  nastype   => 'other',
Jonathan Gazeley's avatar
Jonathan Gazeley committed
254
255
256
  port      => '1645-1646',
  firewall  => true,
}
257
258
```

Jonathan Gazeley's avatar
Jonathan Gazeley committed
259
```puppet
260
# Range example
Jonathan Gazeley's avatar
Jonathan Gazeley committed
261
262
263
264
265
266
267
268
269
270
freeradius::client { "wlan-controllers":
  ip        => '192.168.0.0/24',
  secret    => 'testing123',
  shortname => 'wlc01',
  nastype   => 'other',
  port      => '1645-1646',
  firewall  => true,
}
```

271
##### `ip`
272
The IP address of the client or range in CIDR format. For IPv6, use `ipv6addr`. `ip` and `ip6` are mutually exclusive but one must be supplied.
273
Default: `undef`.
274
275

##### `ip6`
276
The IPv6 address of the client or range in CIDR format. `ip` and `ip6` are mutually exclusive but one must be supplied. Default: `undef`.
Jonathan Gazeley's avatar
Jonathan Gazeley committed
277

278
##### `shortname`
279
A short alias that is used in place of the IP address or fully qualified hostname provided in the first line of the section. Defaults to resource name.
280
281

##### `secret`
282
The RADIUS shared secret used for communication between the client/NAS and the RADIUS server. Required.
283
284

##### `virtual_server`
285
The virtual server that traffic from this client should be sent to. Default: `undef`.
286
287

##### `nastype`
288
The `nastype` attribute is used to tell the `checkrad.pl` script which NAS-specific method it should use when checking simultaneous use. See [`man clients.conf`](http://freeradius.org/radiusd/man/clients.conf.txt) for a list of all options. Default: `undef`.
289

290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
##### `proto`
Transport protocol used by the client. If unspecified, defaults to "udp", which is the traditional RADIUS transport. Valid values are `udp`, `tcp` or `*` for both of them. Default: `undef`.

##### `require_message_authenticator`
Old-style clients do not send a Message-Authenticator in an Access-Request.  RFC 5080 suggests that all clients SHOULD include it in an Access-Request. Valid values are `yes` and `no`. Default: `no`.

##### `login`
Login used by checkrad.pl when querying the NAS for simultaneous use. Default: `undef`.

##### `password`
Password used by checkrad.pl when querying the NAS for simultaneous use. Default: `undef`.

##### `coa_server`
A pointer to the "home_server_pool" OR a "home_server" section that contains the CoA configuration for this client. Default: `undef`.

##### `response_window`
Response window for proxied packets. Default: `undef`.

##### `max_connections`
Limit the number of simultaneous TCP connections from a client. It is ignored for clients sending UDP traffic. Default: `undef`.

##### `lifetime`
The lifetime, in seconds, of a TCP connection. It is ignored for clients sending UDP traffic. Default: `undef`.

##### `idle_timeout`
The idle timeout, in seconds, of a TCP connection. It is ignored for clients sending UDP traffic. Default: `undef`.


318
##### `port`
Jonathan Gazeley's avatar
Jonathan Gazeley committed
319
The UDP port that this virtual server should listen on. Leave blank if this client is not tied to a virtual server. Currently the port number is only used to create firewall exceptions and you only need to specify it if you set `firewall => true`. Use port range syntax as in [`puppetlabs-firewall`](https://forge.puppetlabs.com/puppetlabs/firewall). Default: `undef`.
320

321
322
##### `firewall`
Create a firewall exception for this virtual server. If this is set to `true`, you must also supply `port` and either `ip` or `ip6`. Default: `false`.
323

324
325
326
##### `attributes`
Array of attributes to assign to this client. Default: empty.

327
328
329
330
#### `freeradius::config`

Install arbitrary config snippets from a flat file. These are installed in `/etc/raddb/conf.d`

331
```puppet
332
333
334
335
336
freeradius::config { 'realm-checks.conf':
  source => 'puppet:///modules/site_freeradius/realm-checks.conf',
}
```

337
338
339
340
341
342
```puppet
freeradius::config { 'realm-checks.conf':
  content => template('your_template),
}
```

343
344
345
346
347
348
349
350
351
#### `freeradius::dictionary`

Install custom dictionaries without breaking the default FreeRADIUS dictionary. Custom dictionaries are installed in `/etc/raddb/dictionary.d` and automatically included in the global dictionary.

```puppet
freeradius::dictionary { 'mydict':
  source => 'puppet:///modules/site_freeradius/dictionary.mydict',
}
```
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
#### `freeradius::home_server`

This section defines a "Home Server" which is another RADIUS server that gets sent proxied requests.

##### `secret`

The shared secret use to "encrypt" and "sign" packets between FreeRADIUS and the home server.

##### `type`

Home servers can be sent Access-Request packets or Accounting-Request packets. Allowed values are:
* `auth` Handles Access-Request packets
* `acct`  Handles Accounting-Request packets
* `auth+acct` Handles Access-Request packets at "port" and Accounting-Request packets at "port + 1"
* `coa` Handles CoA-Request and Disconnect-Request packets.

Default: `auth`

##### `ipaddr`

IPv4 address or hostname of the home server. Specify one of `ipaddr`, `ipv6addr` or `virtual_server`

##### `ipv6addr`

IPv6 address or hostname of the home server. Specify one of `ipaddr`, `ipv6addr` or `virtual_server`

##### `virtual_server`

If you specify a virtual_server here, then requests will be proxied internally to that virtual server.
These requests CANNOT be proxied again, however. The intent is to have the local server handle packets
when all home servers are dead. Specify one of `ipaddr`, `ipv6addr` or `virtual_server`

##### `port`

The port to which packets are sent. Usually 1812 for type "auth", and  1813 for type "acct".
Older servers may use 1645 and 1646. Use 3799 for type "coa" Default: `1812`

##### `proto`
The transport protocol. If unspecified, defaults to "udp", which is the traditional
RADIUS transport. It may also be "tcp", in which case TCP will be used to talk to
this home server. Default: `udp`

394
395
396
397
##### `status_check`
Type of check to see if the home_server is dead or alive. Valid values are `none`, `status-server`
and `request`. Default: `undef`.

398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433

#### `freeradius::home_server_pool`

##### `home_server`

An array of one or more home servers. The names of the home servers are NOT the hostnames, but the names
of the sections. (e.g. `home_server foo {...}` has name "foo".

Note that ALL home servers listed here have to be of the same type. i.e. they all have to be "auth", or they all have to
be "acct", or they all have to be "auth+acct".


##### `type`

The type of this pool controls how home servers are chosen.

* `fail-over` the request is sent to the first live home server in the list.  i.e. If the first home server is marked "dead", the second one is chosen, etc.
* `load-balance` the least busy home server is chosen For non-EAP auth methods, and for acct packets, we recommend using "load-balance". It will ensure the highest availability for your network. 
* `client-balance` the home server is chosen by hashing the source IP address of the packet. This configuration is most useful to do simple load balancing for EAP sessions
* `client-port-balance` the home server is chosen by hashing the source IP address and source port of the packet.
* `keyed-balance` the home server is chosen by hashing (FNV) the contents of the Load-Balance-Key attribute from the control items.

The default type is `fail-over`.

##### `virtual_server`

A `virtual_server` may be specified here.  If so, the "pre-proxy" and "post-proxy" sections are called when
the request is proxied, and when a response is received.

##### `fallback`

If ALL home servers are dead, then this "fallback" home server is used. If set, it takes precedence over any realm-based
fallback, such as the DEFAULT realm.

For reasons of stability, this home server SHOULD be a virtual server. Otherwise, the fallback may itself be dead!

434

435
436
#### `freeradius::instantiate`

Jonathan Gazeley's avatar
Jonathan Gazeley committed
437
438
Instantiate a module that is not automatically instantiated.

439
```puppet
Jonathan Gazeley's avatar
Jonathan Gazeley committed
440
441
freeradius::instantiate { 'mymodule': }
```
442

443
#### `freeradius::ldap`
444
445
446
Deprecated. Use `freeradius::module::ldap` instead.

#### `freeradius::module::ldap`
447
448
449

Configure LDAP support for FreeRADIUS

450
451
452
453
##### `ensure`

Whether the site should be present or not.

454
455
456
457
458
459
##### `identity`
LDAP account for searching the directory. Required.

##### `password`
Password for the `identity` account. Required.

460
461
462
463
464
465
466
467
468
##### `sasl`
SASL parameters to use for admin binds to the ldap server. This is a hash with 3 possible keys:

* `mech`: The SASL mechanism used.
* `proxy`: SASL authorizatino identity to proxy.
* `realm`: SASL realm (used for kerberos)

Default: `{}`

469
470
471
472
##### `basedn`
Unless overridden in another section, the dn from which all searches will start from. Required.

##### `server`
473
474
Array of hostnames or IP addresses of the LDAP server(s). Note that this needs to match the name(s) in the LDAP
server certificate, if you're using ldaps. Default: [`localhost`]
475
476
477
478

##### `port`
Port to connect to the LDAP server on. Default: `389`

479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
##### `valuepair_attribute`
Generic valuepair attribute. If set, this attribute will be retrieved in addition to any mapped attributes. Default: `undef`.

##### `update`
Array with mapping of LDAP directory attributes to RADIUS dictionary attributes. Default: `[]`

##### `edir`
Se to `yes` if you have eDirectory and want to use the universal password mechanisms. Possible values are `yes` and `no`. Default: `undef`.

##### `edir_autz`
Set to `yes`if you want to bind as the user after retrieving the Cleartest-Password. Possible values are `yes` and `no`. Default: `undef`.

##### `user_base_dn`
Where to start searching for users in the LDAP tree. Default: `${..base_dn}`.

##### `user_filter`
Filter for user objects. Default: `uid=%{%{Stripped-User-Name}-%{User-Name}})`

##### `user_sasl`
SASL parameters to use for user binds to the ldap server. This is a hash with 3 possible keys:

* `mech`: The SASL mechanism used.
* `proxy`: SASL authorizatino identity to proxy.
* `realm`: SASL realm (used for kerberos)

Default: `{}`

##### `user_scope`
Search scope for users. Valid values are `base`, `one`, `sub` and `children`. Default: `undef` (`sub` is applied).

##### `user_sort_by`
Server side result sorting. A list of space delimited attributes to order the result set by. Default: `undef`.

##### `user_access_attribute`
If this undefined, anyone is authorized. If it is defined, the contents of this attribute determine whether or not the user is authorised. Default: `undef`.

##### `user_access_positive`
Control whether the presence of 'access_attribute' allows access or denys access. Default: `undef`.

##### `group_base_dn`
Where to start searching for groups in the LDAP tree. Default: `${..base_dn}`.

##### `group_filter`
Filter for group objects. Default: `'(objectClass=posixGroup)'`.

##### `group_scope`
Search scope for groups. Valid values are `base`, `one`, `sub` and `children`. Default: `undef` (`sub` is applied).

##### `group_name_attribute`
Attribute that uniquely identifies a group. Default: `undef` (`'cn'` is applied).

##### `group_membership_filter`
Filter to find group objects a user is member of. That is, group objects with attributes that identify members (the inverse of `group_membership_attribute`). Default: `undef`.

##### `group_membership_attribute`
The attribute in user objects which contain the namos or DNs of groups a user is a member of. Default: `'memberOf'`.

##### `group_cacheable_name`
If `group_cacheable_name` or `group_cacheable_dn` are enabled, all group information for the user will be retrieved from the directory and written to LDAP-Group attributes appropiaate for the instance of rlm_ldap. Default: `undef`.

##### `group_cacheable_dn`
If `group_cacheable_name` or `group_cacheable_dn` are enabled, all group information for the user will be retrieved from the directory and written to LDAP-Group attributes appropiaate for the instance of rlm_ldap. Default: `undef`.

##### `group_cache_attribute`
Override the normal cache attribute (`<inst>-LDAP-Group` or `LDAP-Group` if using the default instance) and create a custom attribute. Default: `undef`.

##### `group_attribute`
Override the normal group comparison attribute name (`<inst>-LDAP-Group` or `LDAP-Group` if using the default instance). Default: `undef`.

##### `profile_filter`
Filter for RADIUS profile objects. Default: `undef`.

##### `profile_default`
The default profile. This may be a DN or an attribute reference. Default: `undef`.

##### `profile_attribute`
The LDAP attribute containing profile DNs to apply in addition to the default profile above. Default: `undef`.

##### `client_base_dn`
Where to start searching for clients in the LDAP tree. Default: `'${..base_dn}'`.

##### `client_filter`
Filter to match client objects. Default: `'(objectClass=radiusClient)'`.

##### `client_scope`
Search scope for clients. Valid values are `base`, `one`, `sub` and `children`. Default: `undef` (`sub` is applied).

##### `read_clients`
Load clients on startup. Default: `undef` (`'no'` is applied).

##### `dereference`
Control under which situations LDAP aliases are followed. May be one of `never`, `searching`, `finding` or `always`. Default: `undef` (`always` is applied).

##### `chase_referrals`
With `rebind` control whether the server follows references returned by LDAP directory. Mostly used for AD compatibility. Default: `yes`.

##### `rebind`
With `chase_referrals` control whether the server follows references returned by LDAP directory. Mostly used for AD compatibility. Default: `yes`.

##### `use_referral_credentials`
On rebind, use the credentials from the rebind url instead of admin credentials. Default: `no`.

##### `session_tracking`
If `'yes'`, then include draft-wahl-ldap-session tracking controls. Default: `undef`.

584
585
586
587
##### `uses`
How many times the connection can be used before being re-established. This is useful for things
like load balancers, which may exhibit sticky behaviour without it. `0` is unlimited. Default: `0`

588
589
590
591
592
593
594
595
596
597
598
599
##### `retry_delay`
The number of seconds to wait after the server tries to open a connection, and fails. Default: `30'.

##### `lifetime`
The lifetime (in seconds) of the connection. Default: `0` (forever).

##### `idle_timeout`
Idle timeout (in seconds). A connection which is unused for this length of time will be closed. Default: `60`.

##### `connect_timeout`
Connection timeout (in seconds). The maximum amount of time to wait for a new connection to be established. Default: `3.0`.

600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
##### `idle`
Sets the idle time before keepalive probes are sent. Default `60`

This option may not be supported by your LDAP library. If this configuration entry appears in the
output of `radiusd -X` then it is supported. Otherwise, it is unsupported and changing it will do nothing.

##### `probes`
Sets the maximum number of keepalive probes TCP should send before dropping the connection. Default: `3`

This option may not be supported by your LDAP library. If this configuration entry appears in the
output of `radiusd -X` then it is supported. Otherwise, it is unsupported and changing it will do nothing.

##### `interval`
Setss the interval in seconds between individual keepalive probes. Default: `3`

This option may not be supported by your LDAP library. If this configuration entry appears in the
output of `radiusd -X` then it is supported. Otherwise, it is unsupported and changing it will do nothing.

##### `timeout`
Number of seconds to wait for LDAP query to finish. Default: `10`

621
622
623
624
625
626
##### `timelimit`
Seconds LDAP server has to process the query (server-side time limit). Default: `20`.

##### `ldap_debug`
Debug flag for LDAP SDK. Default: `0x0028`.

627
628
629
##### `start`
Connections to create during module instantiation. If the server cannot create specified number of
connections during instantiation it will exit. Set to 0 to allow the server to start without the
630
directory being available. Default: `${thread[pool].start_servers}`
631
632

##### `min`
633
Minimum number of connections to keep open. Default: `${thread[pool].min_spare_servers}`
634
635
636
637
638

##### `max`
Maximum number of connections. Default: `${thread[pool].max_servers}`

##### `spare`
639
Spare connections to be left idle. Default: `${thread[pool].max_spare_servers}`
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655

##### `starttls`
Set this to 'yes' to use TLS encrypted connections to the LDAP database by using the StartTLS extended operation.
The StartTLS operation is supposed to be used with normal ldap connections instead of using ldaps (port 636) connections

Default: `no`

##### `cafile`
Path to CA cert file for TLS

##### `certfile`
Path to cert file for TLS

##### `keyfile`
Path to key file for TLS

656
657
658
##### `random_file`
Random file used for TLS operations. Default: `undef` (`'/dev/urandom'` is used).

659
660
661
662
663
664
665
666
667
##### `requirecert`
Certificate Verification requirements. Choose from:
'never' (do not even bother trying)
'allow' (try, but don't fail if the certificate cannot be verified)
'demand' (fail if the certificate does not verify)
'hard'  (similar to 'demand' but fails if TLS cannot negotiate)

Default: `allow`

668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
#### `freeradius::krb5`
Configure Kerberos support for FreeRADIUS

##### `keytab`
Full path to the Kerberos keytab file

##### `principal`
Name of the service principal

##### `start`
Connections to create during module instantiation. If the server cannot create specified number of
connections during instantiation it will exit. Set to 0 to allow the server to start without the
directory being available. Default: `${thread[pool].start_servers}`

##### `min`
Minimum number of connections to keep open. Default: `${thread[pool].min_spare_servers}`

##### `max`
Maximum number of connections. Default: `${thread[pool].max_servers}`

##### `spare`
Spare connections to be left idle. Default: `${thread[pool].max_spare_servers}`
690

691
#### `freeradius::module`
692

693
Install a module from a flat file, or enable a stock module that came with your distribution of FreeRADIUS.
694

695
```puppet
696
697
698
699
700
701
702
703
# Enable a stock module
freeradius::module { 'pap':
  preserve => true,
}
```

```puppet
# Install a custom module from a flat file
704
705
706
707
708
freeradius::module { 'buffered-sql':
  source => 'puppet:///modules/site_freeradius/buffered-sql',
}
```

709
```puppet
710
# Install a custom module from a template
711
712
713
714
715
freeradius::module { 'buffered-sql':
  content => template('some_template.erb)',
}
```

716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
#### `freeradius::module::ippool`

Install a `ippool` module

##### `ensure`
If the module should `present` or `absent`. Default: `present`.

##### `range_start`
The first IP address of the pool.

##### `range_stop`
The last IP address of the pool.

##### `netmask`
The network mask used for the pool

##### `cache_size`
The gdbm cache size for the db files. Default: number of IP address in the range.

##### `filename`
The main db file used to allocate address. Default: `${db_dir}/db.${name}`

##### `ip_index`
Helper db index file. Default: `${db_dir}/db.${name}.index`

##### `override`
If set, the Framed-IP-Address already in the reply (if any) will be discarded. Default: `no`.

##### `maximum_timeout`
Maximum time in seconds that an entry may be active. Default: `0` (no timeout).

##### `key`
The key to use for the session database. Default: `undef`.

750
751
752
753
#### `freeradius::policy`

Install a policy from a flat file.

754
```puppet
755
756
757
758
759
freeradius::policy { 'my-policies':
  source => 'puppet:///modules/site_freeradius/my-policies',
}
```

760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
#### `freeradius::realm`

Define a realm in `proxy.conf`. Realms point to pools of home servers.

##### `virtual_server`

Set this to "proxy" requests internally to a virtual server. The pre-proxy and post-proxy sections are run just as with any
other kind of home server.  The virtual server then receives the request, and replies, just as with any other packet.
Once proxied internally like this, the request CANNOT be proxied internally or externally.

##### `auth_pool`

For authentication, the `auth_pool` configuration item should point to a `home_server_pool` that was previously
defined.  All of the home servers in the `auth_pool` must be of type `auth`.

##### `acct_pool`

For accounting, the `acct_pool` configuration item should point to a `home_server_pool` that was previously
defined.  All of the home servers in the `acct_pool` must be of type `acct`.

##### `pool`

If you have a `home_server_pool` where all of the home servers are of type `auth+acct`, you can just use the `pool`
configuration item, instead of specifying both `auth_pool` and `acct_pool`.

##### `nostrip`

Normally, when an incoming User-Name is matched against the realm, the realm name is "stripped" off, and the "stripped"
user name is used to perform matches.If you do not want this to happen, set this to `true`. Default: `false`.


791
792
793
794
795
#### `freeradius::script`

Install a helper script, e.g. which might be called upon by a virtual server. These are
placed in `/etc/raddb/scripts` and are not automatically included by the server.

796
```puppet
Jonathan Gazeley's avatar
Jonathan Gazeley committed
797
freeradius::script{ 'myperlscript.pl':
Jonathan Gazeley's avatar
Jonathan Gazeley committed
798
799
800
801
  source => 'puppet:///modules/site_freeradius/myperlscript.pl',
}
```

802
803
#### `freeradius::site`

Jonathan Gazeley's avatar
Jonathan Gazeley committed
804
Install a virtual server (a.k.a. site) from a flat file. Sites are installed directly
805
806
into `/etc/raddb/sites-enabled`. Any files in this directory that are *not* managed by
Puppet will be removed.
807

808
```puppet
809
810
811
812
813
freeradius::site { 'inner-tunnel':
  source => 'puppet:///modules/site_freeradius/inner-tunnel',
}
```

814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
##### `ensure`

Whether the site should be present or not.

##### `source`

Provide source to a file with the configuration of the site. Default: `undef`.

##### `content`

Provide content for the configuartion of the site. Default: `undef`.

##### `authorize`

Array of options (as String) for the authorize section of the site. This parameter is
ignored if `source` or `content`are used. Default: [].

##### `authenticate`

Array of options (as String) for the authenticate section of the site. This parameter is
ignored if `source` or `content`are used. Default: [].

##### `preacct`

Array of options (as String) for the preacct section of the site. This parameter is
ignored if `source` or `content`are used. Default: [].

##### `accounting`

Array of options (as String) for the accounting section of the site. This parameter is
ignored if `source` or `content`are used. Default: [].

##### `session`

Array of options (as String) for the session section of the site. This parameter is
ignored if `source` or `content`are used. Default: [].

##### `post_auth`

Array of options (as String) for the post-auth section of the site. This parameter is
ignored if `source` or `content`are used. Default: [].

##### `pre_proxy`

Array of options (as String) for the pre-proxy section of the site. This parameter is
ignored if `source` or `content`are used. Default: [].

##### `post_proxy`

Array of options (as String) for the post-proxy section of the site. This parameter is
ignored if `source` or `content`are used. Default: [].

##### `listen`

Array of listen definitions for the site. This parameter is ignored if `source` or
`content`are used. Default: [].

871
872
873
874
875
876
#### `freeradius::sql`

Configure SQL connections. You can define multiple database connections by
invoking this resource multiple times. If you are using MySQL, don't forget to
also set `mysql_support => true` in the base `freeradius` class.

877
878
879
880
881
882
883
884
885
886
```puppet
freeradius::sql { 'mydatabase':
  database  => 'mysql',
  server    => '192.168.0.1',
  login     => 'radius',
  password  => 'topsecret',
  radius_db => 'radius',
}
```

887
888
889
890
891
892
893
894
##### `database`

Default: `undef`. Required. Specify which FreeRADIUS database driver to use. Choose one of `mysql`, `mssql`, `oracle`, `postgresql`

##### `server`

Default: `localhost`. Specify hostname of IP address of the database server.

895
896
897
898
##### `port`

TCP port to connect to the database. Default: `3306`.

899
900
901
902
903
904
905
906
907
908
909
910
911
##### `login`

Default: `radius`. Username to connect to the databae.

##### `password`

Default: `undef`. Required. Password to connect to the database.

##### `radius_db`

Default: `radius`. Name of the database. Normally you should leave this alone. If you are using Oracle then use this instead:
`(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521))(CONNECT_DATA=(SID=your_sid)))`.

912
913
914
915
916
917
918
919
##### `num_sql_socks`

Default: same as `max_servers`. Number of sql connections to make to the database server. 
Setting this to LESS than the number of threads means that some threads may starve, and
you will see errors like "No connections available and at max connection limit". Setting
this to MORE than the number of threads means that there are more connections than necessary.
Leave blank to set it to the same value as the number of threads.

920
921
922
923
924
925
926
927
928
929
##### `lifetime`

Default: `0`. Lifetime of an SQL socket. If you are having network issues such as TCP sessions expiring, you may need to set the socket
lifetime. If set to non-zero, any open connections will be closed `$lifetime` seconds after they were first opened.

##### `max_queries`

Default: `0`. Maximum number of queries used by an SQL socket. If you are having issues with SQL sockets lasting "too long", you can
limit the number of queries performed over one socket. After `$max_qeuries`, the socket will be closed. Use 0 for "no limit".

930
931
##### `query_file`

932
933
**`query_file` has been deprecated - use `custom_query_file` instead**

934
935
936
937
938
939
940
941
Default: `sql/${database}/dialup.conf`. Relative path to the file which contains your SQL queries. By
default, points to the `dialup.conf` specific to your database engine, so leave this blank if you are
using stock queries.

If you need to use custom queries, it is recommended that you deploy your query file using
`freeradius::script` to install the file into `/etc/raddb/scripts/custom_dialup.conf` and then
set `query_file` to `scripts/custom_dialup.conf`.

942
943
944
945
946
947
948
##### `custom_query_file`

Default: `null`. Puppet fileserver path to a file which contains your SQL queries, i.e. `dialup.conf`. This
option is intended to be a replacment for `query_file`, which requires separate deployment of the file. This
option allows you to specify a Puppet-managed custom `dialup.conf` which is installed and loaded automatically.
`query_file` must be left blank if you use `custom_query_file`.

949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
##### `acct_table1`

If you want both stop and start records logged to the same SQL table, leave this as is.  If you want them in
different tables, put the start table in `$acct_table1` and stop table in `$acct_table2`. Default : `radacct`

##### `acct_table2`

If you want both stop and start records logged to the same SQL table, leave this as is.  If you want them in
different tables, put the start table in `$acct_table1` and stop table in `$acct_table2`. Default : `radacct`

##### `postauth_table`

Table for storing data after authentication

##### `authcheck_table`

Default: `radcheck`

##### `authreply_table`

Default: `radreply`

##### `groupcheck_table`

Default: `radgroupcheck`

##### `groupreply_table`

Default: `radgroupreply`

##### `usergroup_table`

Table to keep group info. Default: `radusergroup`

##### `read_groups`

If set to `yes` (default) we read the group tables. If set to `no` the user MUST have `Fall-Through = Yes`
in the radreply table. Default: `yes`.

##### `deletestalesessions`

Remove stale session if checkrad does not see a double login. Default: `yes`.

##### `sqltrace`

Print all SQL statements when in debug mode (-x). Default: `no`.

##### `sqltracefile`

Location for SQL statements to be stored if `$sqltrace = yes`. Default:
Jonathan Gazeley's avatar
Jonathan Gazeley committed
999
`${logdir}/sqllog.sql`
1000
1001
1002
1003
1004
1005
1006
1007
1008

##### `connect_failure_retry_delay`

Number of seconds to dely retrying on a failed database connection (per socket). Default: `60`.

##### `nas_table`

Table to keep radius client info. Default: `nas`.

Angel L. Mateo's avatar
Angel L. Mateo committed
1009
##### `readclients`
1010
1011
1012

Set to `yes` to read radius clients from the database (`$nas_table`) Clients will ONLY be read on server startup. For performance
and security reasons, finding clients via SQL queries CANNOT be done "live" while the server is running. Default: `no`.
1013

1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
##### `pool_start`

Connections to create during module instantiation. Default: 1.

##### `pool_min`

Minimum number of connnections to keep open. Default: 1.

##### `pool_spare`

Spare connections to be left idle. Default: 1.

##### `pool_idle_timeout`

Idle timeout (in seconds). A connection which is unused for this length of time will
be closed. Default: 60.

##### `pool_connect_timeout`

Connection timeout (in seconds). The maximum amount of time to wait for a new
connection to be established. Default: '3.0'.

1036
1037
1038
1039
1040
#### `freeradius::statusclient`

Define RADIUS clients, specifically to connect to the status server for monitoring.
Very similar usage to `freeradius::client` but with fewer options.

1041
##### `ip`
1042
Default: `undef`. The IP address of the client in CIDR format.  For IPv6, use `ipv6addr`. `ip` and `ip6` are mutually exclusive but one must be supplied.
1043
1044

##### `ip6`
1045
Default: `undef`. The IPv6 address of the client in CIDR format. `ip` and `ip6` are mutually exclusive but one must be supplied.
1046
1047
1048
1049
1050
1051
1052
1053
1054

##### `secret`
required. The RADIUS shared secret used for communication between the client/NAS and the RADIUS server.

##### `port`
Default: `undef`. The UDP port that this virtual server should listen on. Leave blank if this client is not tied to a virtual server.

##### `shortname`
required. A short alias that is used in place of the IP address or fully qualified hostname provided in the first line of the section.
1055

1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
#### `freeradius::template`

Define template items that can be referred to in other config items

##### `source`

Provide source to a file with the template item. Specify only one of `source` or `content`.

##### `content`

Provide content of template item. Specify only one of `source` or `content`.
1067

1068
1069
1070
1071
1072
1073
#### `freeradius::virtual_module`

Define a virtual module which consists of one or more other modules, for failover or
load-balancing purposes.

##### `submodules`
Jonathan Gazeley's avatar
Jonathan Gazeley committed
1074
1075
1076

Provide an array of submodules which will be loaded into this virtual module. Required.

1077
1078
##### `type`

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1079
1080
1081
1082
1083
Select the type of virtual module from `redundant`, `load-balance`, `redundant-load-balance`
or `group`. See [virtual modules](http://wiki.freeradius.org/config/Fail-over#virtual-modules)
and [load-balancing](http://wiki.freeradius.org/config/load-balancing) for more details.


1084
```puppet
Jonathan Gazeley's avatar
Jonathan Gazeley committed
1085
# Load virtual module myldap
1086
1087
1088
1089
1090
1091
freeradius::virtual_module { 'myldap':
  submodules => ['ldap1', 'ldap2'],
  type       => 'redundant-load-balance',
}
```

1092
1093
## Limitations

1094
1095
1096
1097
This module is targeted at FreeRADIUS 3.x running on CentOS 7. It will not work on
FreeRADIUS 2.x. It has not been thoroughly tested on other distributions, but
might work. Likely sticking points with other distros are the names of packages,
services and file paths.
1098
1099
1100

This module was written for use with Puppet 3.6 and 3.7, but should be quite agnostic
to new versions of Puppet.
1101
1102
1103

## Development

1104
1105
1106
1107
This module was written primarily for internal use - features we haven't needed to
use probably haven't been written. Please send pull requests with new features and
bug fixes. You are also welcome to file issues but I make no guarantees of
development effort if the features aren't useful to my employer.
1108

1109
## Release Notes
1110

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1111
1112
1113
### 2.3.1
  * Fix bug with log rotation throwing errors when radiusd is not running

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1114
1115
1116
### 2.3.0
  * Add support to configure virtual modules for fail-over and load-balancing

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1117
1118
1119
### 2.2.0
  * Add support to configure the krb5 module

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1120
1121
1122
### 2.1.4
  * Fix compatibility with Puppet 4

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1123
1124
1125
### 2.1.3
  * Fix compatibility with Puppet 4

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1126
1127
1128
### 2.1.2
  * Write out ldap config with different syntax for FreeRADIUS 3.0.x and 3.1.x when using multiple servers

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1129
1130
1131
1132
### 2.1.1

  * Fix bug with the facts not reporting version numbers accurately

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1133
1134
1135
1136
### 2.1.0

  * Various changes to preserve stock modules in a FreeRADIUS installation and be able to toggle them

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1137
1138
1139
1140
1141
1142
1143
1144
### 2.0.1

  * Fix up LDAP template to allow better compatibility with FreeRADIUS 3.1.x

### 2.0.0

  * Drop support for FreeRADIUS 2.x, enabling us to keep the codebase tidier

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1145
1146
1147
1148
### 1.3.0

  * Add support for defining config templates

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1149
1150
1151
1152
### 1.2.6

  * Fix a bug that now enables sqltrace (sqllog) to work on FR3

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1153
1154
1155
1156
### 1.2.5

  * Switch to use [saz/rsyslog](https://forge.puppetlabs.com/saz/rsyslog) to manage syslog rules

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1157
1158
1159
1160
### 1.2.4

  * Start with just 1 SQL socket by default to avoid overloading the SQL server

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1161
1162
1163
1164
### 1.2.3

  * Make facts fail gracefully if radiusd is not installed

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1165
1166
1167
1168
### 1.2.2

  * Fix a bug that stops statusclients from working

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1169
1170
1171
1172
### 1.2.1

  * Fix a bug that prevent 1.2.0 from working on FreeRADIUS 2

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1173
1174
1175
1176
### 1.2.0

 * Deprecate `netmask` parameter from `freeradius::client`

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1177
1178
1179
1180
### 1.1.0

 * Add support to supply an array of multiple LDAP servers

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1181
1182
1183
1184
### 1.0.4

 * Make an educated guess about the version of FR when the fact is unavailable (e.g. on the first Puppet run)

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1185
1186
1187
1188
### 1.0.3

 * Iron out a couple of issues with LDAP compatibility with Active Directory

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1189
1190
1191
1192
### 1.0.2

 * Fixed a bug that prevented LDAP from working on any port except 389

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1193
1194
1195
1196
### 1.0.1

 * Fixed a bug that caused an error when no proxy config items were defined

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
### 1.0.0

 * Support for FreeRADIUS 3
 * Native support for managing the LDAP module
 * Native support for configuring realms (via realms, home_server and home_server_pool)
 * Improved handling of attribute filtering
 * Improved handling of SQL support

This release retains support for FreeRADIUS 2 but some of the parameters have changed so you will probably need to make changes to the way you use this module. Upgrade on a dev system first!

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1207
1208
1209
1210
### 0.4.5

 * Tweak wildcard matching on logrotate config

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1211
1212
1213
1214
### 0.4.4

 * Fix bug displaying deprecation notice and update documentation to reflect this

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1215
1216
1217
1218
### 0.4.3

 * Manage log rotation with [rodjek/logrotate](https://forge.puppetlabs.com/rodjek/logrotate) instead of deploying flat files

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1219
1220
1221
1222
### 0.4.2

 * Provide new SQL option custom_query_file

1223
1224
1225
1226
1227
### 0.4.1

 * Cease management of custom logging modules `logtofile` and `logtosyslog` since it does not make sense to manage these globally 
 * Purge instantiation of unused modules

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1228
1229
1230
1231
### 0.4.0

 * Move control_socket into its own class and add parameters
 * Improve the way the status_server is added or removed
Jonathan Gazeley's avatar
Jonathan Gazeley committed
1232
 * Delete all unmanaged sites from sites-available
Jonathan Gazeley's avatar
Jonathan Gazeley committed
1233

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1234
1235
1236
1237
### 0.3.8

 * Purge all non-managed sites

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1238
1239
1240
1241
1242
### 0.3.7

 * Minor linting of code to improve score
 * Minor linting of metadata to improve score

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1243
1244
1245
1246
### 0.3.6

 * Bugfixes and feature improvements in `freeradius::sql`

1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
### 0.3.5

 * Add ability to customise SQL socket lifetimes
 * Purge all non-managed clients
 * Add defined type to blank out unneeded config files without deleting them

### 0.3.4

 * Correctly pass template content to control-socket

### 0.3.3

 * The default behaviour is now to purge anything in ${confdir}/certs that is not managed by Puppet

### 0.3.2

 * Various improvements to support Debian family
 * Optional content parameters in various resources

### 0.3.1

 * Fix a bug which prevents the module from working properly on Debian/Ubuntu (thanks @diranged)

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1270
1271
1272
1273
### 0.3.0

 * Add `ensure` parameter to all defined types

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1274
1275
1276
1277
### 0.2.0

 * Add support for customising `sql.conf` natively by adding `freeradius::sql`

1278
1279
1280
1281
### 0.1.4

 * Fix ambiguity about net/netmask in freeradius::client

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1282
1283
1284
1285
1286
1287
1288
### 0.1.3

 * Add support for managing firewall rules automatically
 * Add support for installation certificates & keys
 * Make syslog support an optional component
 * Various bugfixes

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1289
1290
1291
1292
1293
1294
1295
### 0.1.2

 * Improved modular installs with optional components
 * Improved support for Debian
 * Clarify dependencies on other modules
 * Lots of bugfixes

Jonathan Gazeley's avatar
Jonathan Gazeley committed
1296
1297
1298
1299
1300
### 0.1.0

 * Initial release with support for installing FreeRADIUS and configuring servers, modules, clients and other objects using flat files.
 * Probably works only with FreeRADIUS 2.x
 * Only tested with CentOS 6
Jonathan Gazeley's avatar
Jonathan Gazeley committed
1301